Laser-irradiating infrared attenuated total reflection spectroscopy of articular cartilage: Potential and challenges for diagnosing osteoarthritis.

Objective: A prototype infrared attenuated total reflection (IR-ATR) laser spectroscopic system designed for in vivo classification of human cartilage tissue according to its histological health status during arthroscopic surgery is presented. Prior to real-world in vivo applications, this so-called osteoarthritis (OA) scanner has been tested at in vitro conditions revealing the challenges associated with complex sample matrices and the accordingly obtained sparse spectral datasets. Methods: In vitro studies on human knee cartilage samples at different contact pressures (i.e., 0.2-0.5 â€‹MPa) allowed recording cartilage degeneration characteristic IR signatures comparable to in vivo conditions with high temporal resolution. Afterwards, the cartilage samples were assessed based on the clinically acknowledged osteoarthritis cartilage histopathology assessment (OARSI) system and correlated with the obtained sparse IR data. Results: Amide and carbohydrate signal behavior was observed to be almost identical between the obtained sparse IR data and previously measured FTIR data used for sparse partial least squares discriminant analysis (SPLSDA) to identify the spectral regions relevant to cartilage condition. Contact pressures between 0.3 and 0.4 â€‹MPa seem to provide the best sparse IR spectra for cylindrical (d â€‹= â€‹3 â€‹mm) probe tips. Conclusion: Laser-irradiating IR-ATR spectroscopy is a promising analytical technique for future arthroscopic applications to differentiate healthy and osteoarthritic cartilage tissue. However, this study also revealed that the flexible connection between the laser-based analyzer and the arthroscopic ATR-probe via IR-transparent fiberoptic cables may affect the robustness of the obtained IR data and requires further improvements.

Comparative finite element analysis of contact and stress distribution in tibiotalar articular cartilage: Healthy versus varus ankles.

Background: The distribution of forces within the ankle joint plays a crucial role in joint health and longevity. Loading disorders affecting the ankle joint can have significant detrimental effects on daily life and activity levels. This study aimed to enhance our understanding of the mechanical behavior of tibiotalar joint articular cartilages in the presence of varus deformity using finite element analysis (FEA) applied to patient-specific models. Methods: Two personalized ankle models, one healthy and another with varus deformity, were created based on CT scan images. Four static loading scenarios were simulated at the center of pressure (COP), coupled to the hindfoot complex. The contact area, contact pressure, and von Mises stress were computed for each cartilage. Results: It was found that the peak contact pressure increased by 54% in the ankle with varus deformity compared to the healthy ankle model. Furthermore, stress concentrations moving medially were observed, particularly beneath the medial malleolus, with an average peak contact pressure of 3.5 MPa and 4.7 MPa at the tibial and talar articular cartilages, respectively. Conclusion: Varus deformities in the ankle region have been consistently linked to elevated contact pressure, increasing the risk of thinning, degeneration, and eventual onset of osteoarthritis (OA), emphasizing the need for prompt interventions aimed at mitigating complications.

Region partitioning of articular cartilage with streaming-potential-based parameters and indentation maps.

Articular cartilage exhibits site-specific tissue inhomogeneity, for which the tissue properties may continuously vary across the articular surface. To facilitate practical applications such as studying site-specific cartilage degeneration, the inhomogeneity may be approximated with several distinct region-wise variations, with one set of tissue properties for one region. A clustering method was previously developed to partition such regions using cartilage indentation-relaxation and thickness mapping instead of simply using surface geometry. In the present study, a quantitative parameter based on streaming potential measurement was introduced as an additional feature to assess the applicability of the methodology with independent datasets. Experimental data were collected from 24 sets of femoral condyles, extracted from fresh porcine stifle joints, through streaming potential mapping, automated indentation, and needle penetration tests. K-means clustering and Elbow method were used to find optimal region partitions. Consistent with previous findings, three regions were suggested for either lateral or medial condyle regardless of left or right joint. The region shapes were approximately triangular or trapezoidal, which was similar to what was found previously. Streaming potentials were confirmed to be region-dependent, but not significantly different among joints. The cartilage was significantly thicker in the medial than lateral condyles. The region areas were consistent among joints, and comparable to that found in a previous study. The present study demonstrated the capability of region partitioning methods with different variables, which may facilitate new applications whenever site-specific tissue properties must be considered.

Enhanced articular cartilage regeneration using costal chondrocyte-derived scaffold-free tissue engineered constructs with ascorbic acid treatment.

Background: Cartilage tissue engineering faces challenges related to the use of scaffolds and limited seed cells. This study aims to propose a cost-effective and straightforward approach using costal chondrocytes (CCs) as an alternative cell source to overcome these challenges, eliminating the need for special culture equipment or scaffolds. Methods: CCs were cultured at a high cell density with and without ascorbic acid treatment, serving as the experimental and control groups, respectively. Viability and tissue-engineered constructs (TEC) formation were evaluated until day 14. Slices of TEC samples were used for histological staining to evaluate the secretion of glycosaminoglycans and different types of collagen proteins within the extracellular matrix. mRNA sequencing and qPCR were performed to examine gene expression related to cartilage matrix secretion in the chondrocytes. In vivo experiments were conducted by implanting TECs from different groups into the defect site, followed by sample collection after 12 weeks for histological staining and scoring to evaluate the extent of cartilage regeneration. Hematoxylin-eosin (HE), Safranin-O-Fast Green, and Masson's trichrome stainings were used to examine the content of cartilage-related matrix components in the in vivo repair tissue. Immunohistochemical staining for type I and type II collagen, as well as aggrecan, was performed to assess the presence and distribution of these specific markers. Additionally, immunohistochemical staining for type X collagen was used to observe any hypertrophic changes in the repaired tissue. Results: Viability of the chondrocytes remained high throughout the culture period, and the TECs displayed an enriched extracellular matrix suitable for surgical procedures. In vitro study revealed glycosaminoglycan and type II collagen production in both groups of TEC, while the TEC matrix treated with ascorbic acid displayed greater abundance. The results of mRNA sequencing and qPCR showed that genes related to cartilage matrix secretion such as Sox9, Col2, and Acan were upregulated by ascorbic acid in costal chondrocytes. Although the addition of Asc-2P led to an increase in COL10 expression according to qPCR and RNA-seq results, the immunofluorescence staining results of the two groups of TECs exhibited similar distribution and fluorescence intensity. In vivo experiments showed that both groups of TEC could adhere to the defect sites and kept hyaline cartilage morphology until 12 weeks. TEC treated with ascorbic acid showed superior cartilage regeneration as evidenced by significantly higher ICRS and O'Driscoll scores and stronger Safranin-O and collagen staining mimicking native cartilage when compared to other groups. In addition, the immunohistochemical staining results of Collgan X indicated that, after 12 weeks, the ascorbic acid-treated TEC did not exhibit further hypertrophy upon transplantation into the defect site, but maintained an expression profile similar to untreated TECs, while slightly higher than the sham-operated group. Conclusion: These results suggest that CC-derived scaffold-free TEC presents a promising method for articular cartilage regeneration. Ascorbic acid treatment enhances outcomes by promoting cartilage matrix production. This study provides valuable insights and potential advancements in the field of cartilage tissue engineering. The translational potential of this article: Cartilage tissue engineering is an area of research with immense clinical potential. The approach presented in this article offers a cost-effective and straightforward solution, which can minimize the complexity of cell culture and scaffold fabrication. This simplification could offer several translational advantages, such as ease of use, rapid scalability, lower costs, and the potential for patient-specific clinical translation. The use of costal chondrocytes, which are easily obtainable, and the scaffold-free approach, which does not require specialized equipment or membranes, could be particularly advantageous in clinical settings, allowing for in situ regeneration of cartilage.

Patella Cartilage Status Does Not Affect the Clinical Outcomes of Non-resurfaced Patella in Mobile-Bearing Total Knee Arthroplasty.

Background: During total knee arthroplasty (TKA), patellar retention is performed when the cartilage is fairly well preserved and the thickness of the patella is relatively thin. However, clinical outcomes of the non-resurfaced patella in TKA according to the cartilage status are lacking in the literature. The purpose of this study was to compare patient-reported outcome measures (PROMs) according to the grade and location of the patellar cartilage lesion in TKA patients. Methods: The outcomes of 165 osteoarthritis patients (186 knees) who underwent cemented mobile-bearing TKA without patellar resurfacing were assessed and classified according to the grade and location of the patellar cartilage lesion. PROMs using the Western Ontario and MacMaster Universities Osteoarthritis index, the Knee Society Score (Knee Society Function Score and Knee Society Knee Score), and the Hospital for Special Surgery score were evaluated preoperatively and at postoperative 2, 4, 6, and 8 years. The correlations between PROMs and the grade and location of the cartilage lesion were assessed. Additionally, radiologic outcomes including the patellar tilt angle and patellar height were assessed and their correlation with the grade of cartilage lesion was analyzed. Analysis of variance was used to determine statistical significance. Results: There was no significant difference between PROMs according to the grades and locations of cartilage lesions at any postoperative follow-up. Radiologic parameters also showed no significant differences according to the grades of patellar cartilage lesions. Conclusions: The grade and location of the patellar cartilage lesion had no influence on clinical outcomes in mobile-bearing TKA with patellar retention at short- and long-term follow-up.

Protective effects of emodin on subchondral bone and articular cartilage in osteoporotic osteoarthritis rats: A preclinical study.

BACKGROUND: Osteoporotic osteoarthritis (OP-OA) is a severe pathological form of OA, urgently requiring precise management strategies and more efficient interventions. Emodin (Emo), an effective ingredient found in the traditional Chinese medicine rhubarb, has been dEmonstrated to promote osteogenesis and inhibit extracellular matrix degradation. In this study, we aimed to investigate the interventional effects of Emo on the subchondral bone and cartilage of the knee joints in OP-OA model rats. METHODS: Thirty-two SD rats were randomly and equally divided into sham, OP-OA, Emo low-dose, and Emo high-dose groups. Micro-CT scanning was conducted to examine the bone microstructure of the rat knee joints. H&E and Safranin O and Fast Green staining (SO&FG) were performed for the pathomorphological evaluation of the rat cartilage tissues. ELISA was used to estimate the rat serum expression levels of inflammatory factors, including interleukin-1ß (IL-1ß) and tumor necrosis factor-α (TNF-α). Additionally, the CCK-8 assay was utilized for determining the viability of Emo-treated BMSCs. Western blot and real-time PCR analyses were also employed to measure the bone formation indexes and cartilage synthesis and decomposition indexes. Lastly, the osteogenic and chondrogenic differentiation efficiency of the BMSCs was investigated via Alizarin Red and Alcian Blue staining. RESULTS: Emo intervention alleviated the bone microstructural disruption of the subchondral bone and articular cartilage in the OP-OA rats and up-regulated the expression of bone and cartilage anabolic metabolism indicators, decreased the expression of cartilage catabolism indicators, and diminished the expression of inflammatory factors in the rat serum (P<0.05). Furthermore, Emo reversed the decline in the osteogenic and chondrogenic differentiation ability of the BMSCs (P<0.05). CONCLUSION: Emo intervention mitigates bone loss and cartilage damage in OP-OA rats and promotes the osteogenic and chondrogenic differentiation of BMSCs.

Biomechanics of the Human Osteochondral Unit: A Systematic Review.

The damping system ensured by the osteochondral (OC) unit is essential to deploy the forces generated within load-bearing joints during locomotion, allowing furthermore low-friction sliding motion between bone segments. The OC unit is a multi-layer structure including articular cartilage, as well as subchondral and trabecular bone. The interplay between the OC tissues is essential in maintaining the joint functionality; altered loading patterns can trigger biological processes that could lead to degenerative joint diseases like osteoarthritis. Currently, no effective treatments are available to avoid degeneration beyond tissues' recovery capabilities. A thorough comprehension on the mechanical behaviour of the OC unit is essential to (i) soundly elucidate its overall response to intra-articular loads for developing diagnostic tools capable of detecting non-physiological strain levels, (ii) properly evaluate the efficacy of innovative treatments in restoring physiological strain levels, and (iii) optimize regenerative medicine approaches as potential and less-invasive alternatives to arthroplasty when irreversible damage has occurred. Therefore, the leading aim of this review was to provide an overview of the state-of-the-art-up to 2022-about the mechanical behaviour of the OC unit. A systematic search is performed, according to PRISMA standards, by focusing on studies that experimentally assess the human lower-limb joints' OC tissues. A multi-criteria decision-making method is proposed to quantitatively evaluate eligible studies, in order to highlight only the insights retrieved through sound and robust approaches. This review revealed that studies on human lower limbs are focusing on the knee and articular cartilage, while hip and trabecular bone studies are declining, and the ankle and subchondral bone are poorly investigated. Compression and indentation are the most common experimental techniques studying the mechanical behaviour of the OC tissues, with indentation also being able to provide information at the micro- and nanoscales. While a certain comparability among studies was highlighted, none of the identified testing protocols are currently recognised as standard for any of the OC tissues. The fibril-network-reinforced poro-viscoelastic constitutive model has become common for describing the response of the articular cartilage, while the models describing the mechanical behaviour of mineralised tissues are usually simpler (i.e., linear elastic, elasto-plastic). Most advanced studies have tested and modelled multiple tissues of the same OC unit but have done so individually rather than through integrated approaches. Therefore, efforts should be made in simultaneously evaluating the comprehensive response of the OC unit to intra-articular loads and the interplay between the OC tissues. In this regard, a multidisciplinary approach combining complementary techniques, e.g., full-field imaging, mechanical testing, and computational approaches, should be implemented and validated. Furthermore, the next challenge entails transferring this assessment to a non-invasive approach, allowing its application in vivo, in order to increase its diagnostic and prognostic potential.

The experimental study of mir-99a-5p negative regulation of TLR8 receptor mediated-mediated innate immune response in rabbit knee cartilage injury.

BACKGROUND: Traumatic cartilage injury is an important cause of osteoarthritis (OA) and limb disability, and toll-like receptors (TLRs) mediated innate immune response has been confirmed to play a crucial role in cartilage injury. In the previous study, we found that the activation of TLR8 molecules in injured articular cartilage was more obvious than other TLRs by establishing an animal model of knee impact injury in rabbits, and the changes of TLR8 molecules could significantly affect the process of articular cartilage injury and repair. OBJECTIVE: To verify how mir-99a-5p regulates TLR8 receptor mediated innate immune response to treat traumatic cartilage injury. METHODS: The impact of a heavy object on the medial condyle of the rabbit's knee joint caused damage to the medial condylar cartilage. Through pathological and imaging analysis, it was demonstrated whether the establishment of an animal model of traumatic cartilage injury was successful. Establishing a cell model by virus transfection of chondrocytes to demonstrate the role of TLR8 in the innate immune response to impact cartilage injury. Through transcriptome sequencing, potential targets of TLR8, mir-99a-5p, were predicted, and basic experiments were conducted to demonstrate how they interact with innate immune responses to impact cartilage damage. RESULTS: TLR8 is a receptor protein of the immune system, which is widely expressed in immune cells. In our study, we found that TLR8 expression is localized in lysosomes and endosomes. Mir-99a-5p can negatively regulate TLR8 to activate PI3K-AKT molecular pathway and aggravate cartilage damage. Inhibiting TLR8 expression can effectively reduce the incidence of articular cartilage damage. CONCLUSION: Based on the results from this study, mir-99a-5p may be an effective molecular marker for predicting traumatic cartilage injury and targeting TLR8 is a novel and promising approach for the prevention or early treatment of cartilage damage.

Evaluation of the consistency of the MRI- based AI segmentation cartilage model using the natural tibial plateau cartilage.

OBJECTIVE: The study aims to evaluate the accuracy of an MRI-based artificial intelligence (AI) segmentation cartilage model by comparing it to the natural tibial plateau cartilage. METHODS: This study included 33 patients (41 knees) with severe knee osteoarthritis scheduled to undergo total knee arthroplasty (TKA). All patients had a thin-section MRI before TKA. Our study is mainly divided into two parts: (i) In order to evaluate the MRI-based AI segmentation cartilage model's 2D accuracy, the natural tibial plateau was used as gold standard. The MRI-based AI segmentation cartilage model and the natural tibial plateau were represented in binary visualization (black and white) simulated photographed images by the application of Simulation Photography Technology. Both simulated photographed images were compared to evaluate the 2D Dice similarity coefficients (DSC). (ii) In order to evaluate the MRI-based AI segmentation cartilage model's 3D accuracy. Hand-crafted cartilage model based on knee CT was established. We used these hand-crafted CT-based knee cartilage model as gold standard to evaluate 2D and 3D consistency of between the MRI-based AI segmentation cartilage model and hand-crafted CT-based cartilage model. 3D registration technology was used for both models. Correlations between the MRI-based AI knee cartilage model and CT-based knee cartilage model were also assessed with the Pearson correlation coefficient. RESULTS: The AI segmentation cartilage model produced reasonably high two-dimensional DSC. The average 2D DSC between MRI-based AI cartilage model and the tibial plateau cartilage is 0.83. The average 2D DSC between the AI segmentation cartilage model and the CT-based cartilage model is 0.82. As for 3D consistency, the average 3D DSC between MRI-based AI cartilage model and CT-based cartilage model is 0.52. However, the quantification of cartilage segmentation with the AI and CT-based models showed excellent correlation (r = 0.725; P values < 0.05). CONCLUSION: Our study demonstrated that our MRI-based AI cartilage model can reliably extract morphologic features such as cartilage shape and defect location of the tibial plateau cartilage. This approach could potentially benefit clinical practices such as diagnosing osteoarthritis. However, in terms of cartilage thickness and three-dimensional accuracy, MRI-based AI cartilage model underestimate the actual cartilage volume. The previous AI verification methods may not be completely accurate and should be verified with natural cartilage images. Combining multiple verification methods will improve the accuracy of the AI model.

Capsular attachment on the anterosuperior femoral head-neck junction: A hypothesis about femoroacetabular impingement.

Femoroacetabular impingement (FAI), characterized by a pathological contact between the proximal femur and acetabulum, is a common precursor of hip osteoarthritis. Cam morphology is a bony prominence that causes FAI and frequently forms on the anterosuperior femoral head-neck junction. Despite anatomical consensus regarding the femoral head-neck junction as a boundary area covered by the articular cartilage and joint capsule, it remains unclear whether the joint capsule is continuous with the anterosuperior articular cartilage. For the anatomical consideration of cam morphology formation, this study aimed to investigate the histological characteristics of the capsular attachment on the anterosuperior femoral head-neck junction, particularly focusing on the presence or absence of continuity of the joint capsule to the articular cartilage. A total of 21 anterosuperior regions (seven hips each for the 12:00, 1:30, and 3:00 positions) from seven hips (three males and four females; mean age at death, 68.7 years) were histologically analyzed in this study for quantitative evaluation of the capsular thickness using histological sections stained with Masson's trichrome, as well as qualitative evaluation of the capsular attachment. The present study showed that the joint capsule, which folded proximally to the femoral head-neck junction from the recess, exhibited a blend of the fibrous and synovial regions. Notably, it not only continued with the superficial layer of the articular cartilage, but also attached to the articular cartilage via the fibrocartilage. This continuous region was relatively fibrous with dense connective tissue running in the longitudinal direction. The capsular thickness at the recess point (mean, 1.7 ± 0.9 mm) and those at the distal end of the articular cartilage (0.35 ± 0.16 mm) were significantly greater than the control value for the most superficial layer thickness of the articular cartilage (0.019 ± 0.003 mm) (Dunnett's T3, both p-value <0.001). Based on the fibrous continuity between the joint capsule and articular cartilage and its thickness, this study suggests the anatomical possibility that some mechanical stress can be transmitted from the joint capsule to the articular cartilage at the frequent sites of cam morphology.

Locking plate fixation in comminuted coronoid fractures with partial loss of the articular cartilage - Of basal-1 type according to the O'Driscoll classification.

BACKGROUND: We have attempted to restore the arc of motion by considering trochlear-coronoid articulation as a complete circle during fixation of the coronoid, even for comminuted coronoid fractures with partial loss of articular cartilage (CCFPLAC), using various kinds of locking plates. Herein, we report the radiological and clinical outcomes after fixation of the basal-1 type of CCFPLAC (O'Driscoll classification) using our method. METHODS: Thirty-one patients diagnosed with CCFPLAC were admitted between January 2012 and December 2020. Sixteen of these patients met the inclusion/exclusion criteria and were enrolled in this study. Surgically, the lost area (defect of articular cartilage) was never compressed or minimized, but the original height and shape of the coronoid were preserved as is. Provisionally, a few K-wires were used to maintain the original shape and position of the CCFPLAC, and various kinds of locking plates/screws were used to fix the fragment anatomically and firmly. If needed, the plate was bent to ensure stable compression of the coronoid according to its size. In a few cases, locking plates were adjusted by cutting extra screw holes. RESULTS: Among the 16 patients, the mean age was 46.2 years, and the male:female ratio was 10:6. The mean follow-up period was 3.63 years. 8, 6, and 2 patients were designated as group 1 (isolated CCFPLAC), 2 [CCFPLAC in type 4 (terrible triad) injury), and 3 (CCFPLAC in type 5 posterior olecranon fracture-dislocations), respectively. Complete union was achieved after a mean of 8.94 weeks. The mean flexion-extension and pronation-supination arcs were 127.19 ± 4.46° and 135.31.59 ± 8.06°, respectively, which were significantly different from those on the contralateral (normal) side (p < 0.001); however, the arcs were within the functional ranges for ordinary daily living. Additionally, the functional status was satisfactory in all patients. However, Mayo Elbow Performance Score and the degree of arthritis were statistically poor in group 2. CONCLUSIONS: CCFPLAC of the basal-1 type (O'Driscoll classification) can be treated satisfactorily if already designed and widely distributed locking plates are properly manipulated to maintain the original geometry of the coronoid according to the individual joint characteristics. LEVEL OF EVIDENCE: Level IV, Retrospective case series.

Wet 3D printing of biodegradable porous scaffolds to enable room-temperature deposition modeling of polymeric solutions for regeneration of articular cartilage.

Tissue engineering has emerged as an advanced strategy to regenerate various tissues using different raw materials, and thus it is desired to develop more approaches to fabricate tissue engineering scaffolds to fit specific yet very useful raw materials such as biodegradable aliphatic polyester like poly (lactide-co-glycolide) (PLGA). Herein, a technique of 'wet 3D printing' was developed based on a pneumatic extrusion three-dimensional (3D) printer after we introduced a solidification bath into a 3D printing system to fabricate porous scaffolds. The room-temperature deposition modeling of polymeric solutions enabled by our wet 3D printing method is particularly meaningful for aliphatic polyester, which otherwise degrades at high temperature in classic fuse deposition modeling. As demonstration, we fabricated a bilayered porous scaffold consisted of PLGA and its mixture with hydroxyapatite for regeneration of articular cartilage and subchondral bone. Long-termin vitroandin vivodegradation tests of the scaffolds were carried out up to 36 weeks, which support the three-stage degradation process of the polyester porous scaffold and suggest faster degradationin vivothanin vitro. Animal experiments in a rabbit model of articular cartilage injury were conducted. The efficacy of the scaffolds in cartilage regeneration was verified through histological analysis, micro-computed tomography (CT) and biomechanical tests, and the influence of scaffold structures (bilayerversussingle layer) onin vivotissue regeneration was examined. This study has illustrated that the wet 3D printing is an alternative approach to biofabricate tissue engineering porous scaffolds based on biodegradable polymers.

High tibial osteotomy combined with cartilage restoration: A systematic review of clinical outcomes and prognostic factors.

Background: Focal chondral defects are often treated with cartilage restoration procedures. Malalignment often accompanies chondral defects. High tibial osteotomy (HTO), classically utilized to treat uni-compartmental knee osteoarthritis, corrects malalignment. HTO combined with cartilage restoration procedures can treat uni-compartmental osteoarthritis and focal chondral defects. Purpose: To assess outcomes of combined HTO and cartilage restoration procedures and review prognostic factors that may assist in preoperative planning and patient counseling. Study design: Systematic Review of published literature. Methods: A systematic review of PubMed and Scopus was performed following PRISMA guidelines. Thirty-four papers were included in qualitative considerations. Results: Thirty-four papers that reported the combined outcome of HTO and cartilage repair were included. Twenty of the 34 included papers reported prognostic factors that affected the success or failure of combined HTO and cartilage repair surgery for focal articular defect and uni-compartmental knee osteoarthritis. Cartilage repair techniques that were combined with HTO and included in this review are bone marrow stimulation, allograft transplantation, osteochondral autograft transplantation, autologous chondrocyte implantation, and mesenchymal stem cell implantation. Conclusions: HTO with adjunctive cartilage repair procedures improve clinical outcome scores and restore alignment in patients with medial compartment osteoarthritis and isolated focal chondral defects. HTO with adjunctive cartilage procedures produces optimal results in younger, non-obese patients with focal chondral defects and varus malalignment, without significant lateral compartment and patellofemoral involvement.

Articular cartilage corefucosylation regulates tissue resilience in osteoarthritis.

This study aimed to investigate the glycan structural changes that occur before histological degeneration in osteoarthritis (OA) and to determine the mechanism by which these glycan conformational changes affect cartilage degeneration. An OA model was established in rabbits using mannosidase injection, which reduced high-mannose type N-glycans and led to cartilage degeneration. Further analysis of glycome in human OA cartilage identified specific corefucosylated N-glycan expression patterns. Inhibition of N-glycan corefucosylation in mice resulted in unrecoverable cartilage degeneration, while cartilage-specific blocking of corefucosylation led to accelerated development of aging-associated and instability-induced OA models. We conclude that α1,6 fucosyltransferase is required postnatally to prevent preosteoarthritic deterioration of articular cartilage. These findings provide a novel definition of early OA and identify glyco-phenotypes of OA cartilage, which may distinguish individuals at higher risk of progression.

Inhibition of Phlpp1 preserves the mechanical integrity of articular cartilage in a murine model of post-traumatic osteoarthritis.

OBJECTIVE: Phlpp1 inhibition is a potential therapeutic strategy for cartilage regeneration and prevention of post-traumatic osteoarthritis (PTOA). To understand how Phlpp1 loss affects cartilage structure, cartilage elastic modulus was measured with atomic force microscopy (AFM) in male and female mice after injury. METHODS: Osteoarthritis was induced in male and female Wildtype (WT) and Phlpp1-/- mice by destabilization of the medial meniscus (DMM). At various timepoints post-injury, activity was measured, and knee joints examined with AFM and histology. In another cohort of WT mice, the PHLPP inhibitor NSC117079 was intra-articularly injected 4 weeks after injury. RESULTS: Male WT mice showed decreased activity and histological signs of cartilage damage at 12 but not 6-weeks post-DMM. Female mice showed a less severe response to DMM by comparison, with no histological changes seen at any time point. In both sexes the elastic modulus of medial condylar cartilage was decreased in WT mice but not Phlpp1-/- mice after DMM as measured by AFM. By 6-weeks, cartilage modulus had decreased from 2 MPa to 1 MPa in WT mice. Phlpp1-/- mice showed no change in modulus at 6-weeks and only a 25% decrease at 12-weeks. The PHLPP inhibitor NSC117079 protected cartilage structure and prevented signs of OA 6-weeks post-injury. CONCLUSIONS: AFM is a sensitive method for detecting early changes in articular cartilage post-injury. Phlpp1 suppression, either through genetic deletion or pharmacological inhibition, protects cartilage degradation in a model of PTOA, validating Phlpp1 as a therapeutic target for PTOA.

Enzymatic digestion does not compromise sliding-mediated cartilage lubrication.

Articular cartilage's remarkable low-friction properties are essential to joint function. In osteoarthritis (OA), cartilage degeneration (e.g., proteoglycan loss and collagen damage) decreases tissue modulus and increases permeability. Although these changes impair lubrication in fully depressurized and slowly slid cartilage, new evidence suggests such relationships may not hold under biofidelic sliding conditions more representative of those encountered in vivo. Our recent studies using the convergent stationary contact area (cSCA) configuration demonstrate that articulation (i.e., sliding) generates interfacial hydrodynamic pressures capable of replenishing cartilage interstitial fluid/pressure lost to compressive loading through a mechanism termed tribological rehydration. This fluid recovery sustains in vivo-like kinetic friction coefficients (µk<0.02 in PBS and <0.005 in synovial fluid) with little sensitivity to mechanical properties in healthy tissue. However, the tribomechanical function of compromised cartilage under biofidelic sliding conditions remains unknown. Here, we investigated the effects of OA-like changes in cartilage mechanical properties, modeled via enzymatic digestion of mature bovine cartilage, on its tribomechanical function during cSCA sliding. We found no differences in sliding-driven tribological rehydration behaviors or µk between naïve and digested cSCA cartilage (in PBS or synovial fluid). This suggests that OA-like cartilage retains sufficient functional properties to support naïve-like fluid recovery and lubrication under biofidelic sliding conditions. However, OA-like cartilage accumulated greater total tissue strains due to elevated strain accrual during initial load application. Together, these results suggest that elevated total tissue strains-as opposed to activity-mediated strains or friction-driven wear-might be the key biomechanical mediator of OA pathology in cartilage. STATEMENT OF SIGNIFICANCE: Osteoarthritis (OA) decreases cartilage's modulus and increases its permeability. While these changes compromise frictional performance in benchtop testing under low fluid load support (FLS) conditions, whether such observations hold under sliding conditions that better represent the joints' dynamic FLS conditions in vivo is unclear. Here, we leveraged biofidelic benchtop sliding experiments-that is, those mimicking joints' native sliding environment-to examine how OA-like changes in mechanical properties effect cartilage's natural lubrication. We found no differences in sliding-mediated fluid recovery or kinetic friction behaviors between naïve and OA-like cartilage. However, OA-like cartilage experienced greater strain accumulation during load application, suggesting that elevated tissue strains (not friction-driven wear) may be the primary biomechanical mediator of OA pathology.

High Hopes for the Biofabrication of Articular Cartilage-What Lies beyond the Horizon of Tissue Engineering and 3D Bioprinting?

Technologies and biomaterials for 3D bioprinting have been developing extremely quickly in the past decade as they hold great potential in tissue engineering. This, together with the possibility to differentiate stem cells of different origin into any cell type, raises the hopes in regenerative medicine once again after the initial breakthrough with stem cells in the 1980s. Nevertheless, three decades of 3D bioprinting experiments have shown that the production of functional tissues would take a longer time than anticipated. Cartilage, one of the simplest tissues in the body, consists of only one cell type. It is not vascularised and innervated and does not have lymphatic vessels either, which makes it a perfect target tissue for successful implantation. The tremendous amount of work since the beginning of this century, combining the efforts of bioengineers, material scientists, biologists, and physicians, has culminated in multiple proof-of-concept constructs that have been implanted in animals. However, there is no single reproducible, standardised, widely accessible and accepted strategy that can be readily applied in the clinic. In this review, we focus on the current progress in the field of the 3D biofabrication of articular cartilage and critically assess failures and future challenges.

Correlation Between Rotator Cuff Tear in Thai Urban Elderly Population and Vitamin D Deficiency.

Background The benefits of vitamin D encompass the augmentation of rotator cuff healing, the enhancement of bone mineral density (BMD), and the fortification of skeletal muscle strength. The vitamin D deficiency in Asian countries appears to be more severe compared to their Western counterparts. This study aims to ascertain the relationship between rotator cuff tears and vitamin D levels in the urban Thai elderly demographic. Our hypothesis posits that vitamin D deficiency will exhibit an association with the occurrence of rotator cuff tears. Materials and methods A prospective clinical trial conducted at a single tertiary was carried out to assess the patients experiencing shoulder pain who were aged 60 years or older. All participants were tested of blood specimens for calciferol concentration and magnetic resonance imaging (MRI). The duration between blood sample collection and magnetic resonance imaging (MRI) did not exceed a two-week window. The assessment of fatty degeneration in the supraspinatus, infraspinatus, and subscapularis muscles, as well as tear dimensions and cartilage thickness, was conducted using magnetic resonance imaging within the outpatient clinic. Results The analysis of serum vitamin D levels within a cohort comprising 59 subjects produced significant observations, indicating that 20.03% of the participants manifested a deficiency in vitamin D and 44.07% exhibited insufficiency in vitamin D levels. There was no observed correlation between serum vitamin D levels and various patient parameters, including age (P = .99), body mass index (P = 0.31), tear size (P = 0.41), cartilage thickness at different locations on the humeral head (superior, middle, inferior, and total) (P = 0.31, 0.40, 0.26, 0.20, respectively), degree of fatty infiltration of the rotator cuff (P = 0.81), and severity of the rotator cuff condition (P = 0.13). A significant positive correlation was established between rotator cuff tear size and both the severity of the rotator cuff condition (P < 0.001) and the degree of fatty infiltration of the cuff (P < 0.001). Conclusion A negative correlation is observed between serum vitamin D levels and various parameters, including tear size, fatty infiltration, cartilage thickness, and the severity of rotator cuff tears within the elderly urban Thai population. To affirm these findings, it is imperative to conduct additional research and integrate vitamin D assessments into the management strategies for aging populations with rotator cuff conditions.

Mechanical loading rescues mechanoresponsiveness in a human osteoarthritis explant model despite Wnt activation.

OBJECTIVES: Optimizing rehabilitation strategies for osteoarthritis necessitates a comprehensive understanding of chondrocytes' mechanoresponse in both health and disease, especially in the context of the interplay between loading and key pathways involved in osteoarthritis (OA) development, like canonical Wnt signaling. This study aims to elucidate the role of Wnt signaling in the mechanoresponsiveness of healthy and osteoarthritic human cartilage. METHODS: We used an ex-vivo model involving short-term physiological mechanical loading of human cartilage explants. First, the loading protocol for subsequent experiments was determined. Next, loading was applied to non-OA-explants with or without Wnt activation with CHIR99021. Molecular read-outs of anabolic, pericellular matrix and matrix remodeling markers were used to assess the effect of Wnt on cartilage mechanoresponse. Finally, the same set-up was used to study the effect of loading in cartilage from patients with established OA. RESULTS: Our results confirm that physiological loading maintains expression of anabolic genes in non-OA cartilage, and indicate a deleterious effect of Wnt activation in the chondrocyte mechanoresponsiveness. This suggests that loading-induced regulation of chondrocyte markers occurs downstream of canonical Wnt signaling. Interestingly, our study highlighted contrasting mechanoresponsiveness in the model of Wnt activation and the established OA samples, with established OA cartilage maintaining its mechanoresponsiveness, and mechanical loading rescuing the chondrogenic phenotype. CONCLUSION: This study provides insights into the mechanoresponsiveness of human cartilage in both non-OA and OA conditions. These findings hold the potential to contribute to the development of strategies that optimize the effect of dynamic compression by correcting OA pathological cell signaling.

Catalpol promotes articular cartilage repair by enhancing the recruitment of endogenous mesenchymal stem cells.

Articular cartilage defect is challenged by insufficient regenerative ability of cartilage. Catalpol (CA), the primary active component of Rehmanniae Radix, could exert protective effects against various diseases. However, the impact of CA on the treatment of articular cartilage injuries is still unclear. In this study, full-thickness articular cartilage defect was induced in a mouse model via surgery. The animals were intraperitoneally injected with CA for 4 or 8 weeks. According to the results of macroscopic observation, micro-computed tomography CT (µCT), histological and immunohistochemistry staining, CA treatment could promote mouse cartilage repair, resulting in cartilage regeneration, bone structure improvement and matrix anabolism. Specifically, an increase in the expression of CD90, the marker of mesenchymal stem cells (MSCs), in the cartilage was observed. In addition, we evaluated the migratory and chondrogenic effects of CA on MSCs. Different concentration of CA was added to C3H10 T1/2 cells. The results showed that CA enhanced cell migration and chondrogenesis without affecting proliferation. Collectively, our findings indicate that CA may be effective for the treatment of cartilage defects via stimulation of endogenous MSCs.